The Big-Lifter offers power raising and lowering of your power wheelchair or scooter weighing up to 300 pounds, allowing you to manually swing it in or out of the vehicle. The manual swing has a low-resistance design that is easy to swing in and out. It requires no structural modification to the vehicle.

The model 602 is for 250lbs and under scooters,
as well as power wheelchairs. The model 672 is
rated for up to 400lbs of lifting capacity, and the
model 692 is specifically designed for with a
telescoping arm for the rear of vehicles with
severely sloped rear body designs and wide bumpers. The Curb-Sider design provides 180
degree power rotation for raising and lowering
your scooter or wheelchair for the rear or side position.

The Scooter-Lift Jr. can end the struggle of manually trying to lift and store a scooter in the trunk or hatch opening of your vehicle. The "Jr." was designed to help raise and store three-wheeled scooters in most auto trunks, station wagons or hatchbacks, as long as the opening is large enough to accept the partially disassembled scooter and compact lift.

The VSL-900C is specifically designed to raise
and store a fully assembled scooter or wheelchair through the minivan driver or passenger's side sliding door. This lift requires very little arm strength, balance or effort to use. It is so compact that even in a minivan there is still enough room for three passengers to sit comfortably in the rear seat.

The Space-Saver is a take-apart lift that solves the problem of storing a scooter in smaller vehicles with limited trunk space. The placement of this lift allows scooters to be stored in spaces that won't work with more conventional lift designs.

This lift is designed with a low-profile head to make storing your scooter even easier. All of the controls are located conveniently on top of the lift arm. The Offset Space-Saver can be stored anywhere. It disassembles quickly and easily and requires only three steps. When an additional lower base assembly is ordered, it can even be used in more than one vehicle.

The Out-Sider can raise and store 3 or 4 wheel scooters weighing up to 200 lbs using a Class III hitch with a 2" receiver. The operation is fully automatic; the special weight-sensing device applies exactly the right amount of pressure to the hold-tight device to secure the scooter.

Cab-Sider

The Cab-Sider gives you the advantage of driving a pickup while being able to store your manual wheelchair inside. The truck bed is free to use for other things and can even be equipped with a cap, if desired. The Cab-Sider is available for any full size or compact truck that features an extended cab with a 3rd door.

The Out-Rider's unique design allows you to lift and store your wheelchair in the bed of your full size, mid-size or extended cab pickup while sitting in the cab of the truck. With minor adaptations, the Out-Rider can easily lift a scooter, rigid or power wheelchair under 200 lbs. A more powerful heavy-duty lift arm is available as an option. Bruno also offers a power operated camper top to work with the Out-Rider.