SCOOTER-LIFT II

• The Scooter-Lift II can raise and store a fully assembled scooter or wheelchair through the driver's or passenger's side sliding door of minivans, and passenger side doors of full size vans.

• The Scooter-Lift II requires very little arm strength, balance or effort to use. It is so compact that even in a minivan, there is still enough room for three passengers to sit comfortably in the rear seat. With scooter removed, or when traveling without the scooter, entry and exit is easy since the door opening remains unobstructed.

• Bruno's Scooter-Lift II also features an optional installation assembly that eliminates drilling any holes in the floor of the vehicle. This means easier removal when it comes time to transfer the lift in and out of a minivan. Contact Bruno's Technical Applications Department about specific applications for this system.

• The Scooter-Lift II can be used for either three-or four-wheel scooters and manual folding or power wheelchairs weighing up to 200 lbs. (91k). The Scooter-Lift II's hand-held controller makes this lift simple and easy to use. The Scooter-Lift II uses electrical power from the vehicle's battery and all lift operations are automatic. You only need to help guide the scooter or wheelchair into place.

• Expert installation and complete after-sale service is provided by Bruno's nationwide and international network of dealers.